- Glues down peeling paint
- Stabilises cracking surfaces before repainting
- Stabilises chalking surfaces
- Transforms peeling surfaces into a sound surface
- Flexible and breathable
- Interior and exterior use
-
Peel Stop is a clear, flexible bridging sealer for surfaces where peeling, flaking, dusting or chalking is a problem. Use indoors or out to form a breathable membrane over questionable or faulty substrates. Peel Stop tightly bonds to old paint and problem areas forming a sound surface for new paint. Peel Stop forms a tough acrylic film that stays flexible and helps prevent peeling by letting moisture escape. A clear sealer, Peel Stop works like nothing else to stop peeling problems on old or new surfaces. Recommended uses: Peel Stop prevents peeling, blistering, checking, cracking and flaking on wood siding and trim, yellow pine, rough sawn cedar, textured plywood, chalking or powdering, concrete and concrete block, stucco and galvanized gutters. -
- Repairs torn paper on damaged drywall and eliminates bubbles
- Seals old wallpaper adhesive
- Water-based
- Low odour
- Dries clear
- Dries fast to a hard, moisture-proof film
- Binds down chalky surfaces
- Can be applied to high-pH surfaces
- Cleans up with soap and water
-
Ceiling Pro 5-in-1 is based on ground-breaking paint technology that effortlessly provides a perfectly finished ceiling every time. It adheres to any surface, seals stains (including water and smoke stains), primes and finishes whilst bridging hairline cracks. In addition, Ceiling Pro 5-in-1 contains a biocide that protects the dried coating against fungal degradation, prolonging the life of the painted ceiling.- 5-in-1 - primes, seals, blocks stains, finishes and covers cracks*
- Like no other product on market - no other products offer stain blocking properties alongside filling cracks or stain cover and finish in one
- Flat white non-yellowing finish
- For bare and previously painted ceilings
- Touch dry in 30 minutes - re-coat in 1 hour
- Low odour
- Ultra low VOC content
-
Drywall Pro 2-in-1 is a unique priming and sealing system for preparing new or damaged drywall, plaster and porous surfaces for painting, wallpapering, texturing and other decorative projects. Drywall Pro 2-in-1 penetrates and seals these surfaces to create a sound, water-resistant and trouble-free foundation for painting, wallpapering, texturing and other projects.- White finish
- High-hiding formulation
- Alkali resistant
- Prevents bubbling
- No damage on redecoration when removing contract vinyl wallpaper
- Low odour
- Protects drywall against water-based paints and adhesives
- No other product combines priming and sealing properties
- Touch dry in 30 minutes - re-coat in 3 hours
-
Wallpaper Cover-Up is an all-in-one primer, sealer and stain blocker. A high hiding primer that obliterates wallpaper print with a smooth matt off-white finish. Can be used under any coloured emulsion. Wallpaper Cover-Up can be applied by either brush or roller - for best results use a short pile mohair or microfiber roller. Unlike a regular emulsion which can cause wallpaper to bubble and blister, Wallpaper Cover-Up seals the wallpaper. This one-coat system creates a new surface that's easy to paint. Wallpaper Cover-Up also includes a stain blocker, which means that seeping stains from smoke and damp residue are easily covered with no fear of re-emergence.- Obliterates wallpaper print
- Prevents blistering of wallpaper
- Blocks water soluble stains
- Re-coat in 4 hours
-
Since 1946 professional decorators have been using B-I-N Primer Sealer to seal the worst stains and block the worst odours. Today, over 70 years later, it is still the ultimate performance primer. B-I-N has a unique shellac based formula which gives it unsurpassed stain killing power €“ water stains, smoke damage, crayon €“ you name it, B-I-N will block it. In addition to blocking the stain, B-I-N also permanently blocks the odour €“ another great €˜plus' particularly for restoration work after flooding or fire damage.- Shellac based
- Premier stain blocker - blocks water stains, smoke stains, etc
- Completely seals in odours
- Dries in 15 minutes, can be recoated in 45 minutes
- Primes and seals all interior surfaces
- Bonds tightly to glossy surfaces
- Compatible with latex, alkyd, epoxy, lacquer and other finishes
- Tintable
-
- Innovative vertical spraying aerosol €“ great for blocking stains on ceilings
- Dries flat white
- Matches the colour of most ceiling tiles
- Sticks to all surfaces without sanding
- Primer and finish in one product
- Seals water and smoke stains
- High hiding capabilities
- Non-yellowing
- Oil based
-
This unique oil-based primer is formulated to dry in only one hour and yet remain flexible and durable enough for priming a wide variety of interior and exterior surfaces. Cover Stain is breathable for best exterior performance and is an effective stain barrier. For painters who prefer and need oil base performance, Cover Stain will provide top quality results and has great application properties. Cover Stain is also a good €˜winter use' alternative to Bulls Eye 1-2-3 as it can be used at lower temperatures.- Oil based
- Interior and exterior use
- Stain killer and tannin blocker
- Excellent enamel undercoater
- Multi-surface primer
- Bonds to high gloss surfaces
- Ideal for new construction
- Great sprayability
- Can be used in low temperatures
- Seals porous surfaces
- Compatible with oil-based or waterbased top coats
- Deep tint version available for dark colours
-
Made with Zinsser's unique proprietary acrylic resins for exceptional flexibility and durability. Bulls Eye 1-2-3 can be used under or over any oil or latex paint and will bond to virtually any surface. Its adhesion characteristics are legendary €“ gloss paint, PVC, ceramic tiles, glass, lead, galvanised metal €“ it takes them all in its stride without the need of time consuming sanding, just make sure the surface is thoroughly cleaned and degreased first.- Water based
- Interior and exterior use
- Bonds to all surfaces including glossy and hard-to-paint surfaces such as ceramic tiles,
- galvanising, aluminium, glass, gloss paint, PVC, lead, etc
- No prior sanding needed to produce a €˜key'
- Compatible with water-based or oil-based top coats
- Seals all porous surfaces
- Superior stain blocking
- Low odour, fast drying and tintable
- Dry film is breathable and flexible €“ resists cracking and peeling
- Deep tint version available for dark colours
-
Bulls Eye® 1-2-3 Plus is a next generation universal water-based primer, sealer and stainkiller. It is ideal for interior and exterior painting projects. Bulls Eye® 1-2-3 Plus delivers performance benefits normally only associated with solvent-based primers, including exceptional adhesion and stain blocking. No other water-based primer delivers the stain blocking power of Bulls Eye® 1-2-3 Plus. It is specially formulated to resist re-wetting, meaning it can block water soluble stains like a solvent-based primer and seal oil-soluble stains, meaning painting projects can be completed with just one primer. Uniquely, it can be applied directly over water and smoke stains. Bulls Eye® 1-2-3 Plus delivers unparalleled adhesion and deals effortlessly with hard to paint interior and exterior substrates such as glossy surfaces, ceramic tiles, non-ferrous metal (such as aluminium, stainless steel and galvanised metal), vinyl, hardboard, melamine, varnish, plastic, GRP, UPVC, wood, masonry and more. Bulls Eye® 1-2-3 Plus contains a biocide that protects the dried coating against fungal degradation, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to fungal degradation on the underside and surface of the primer film, prolonging the life of your paint job. All of the above benefits combine with ultra low VOC content, a lightning quick drying time of just 30 minutes and a 1 hour recoat time.- Low odour, water-based formula
- Primer, sealer and stainkiller
- Unrivaled adhesion
- Blocks the toughest of stains - even water and smoke
- For any interior / exterior surface
- Dries in 30 mins, recoat in 1 hour
- 12.5pH Alkali resistant
- Ultra low VOC
-
B-I-N AQUA is a groundbreaking, water-based, 4-in-1 primer, that offers the same trusted performance advantages as the renowned B-I-N and more. Following extensive market research, B-I-N AQUA has been developed as the results showed a gap in the decorating industry for a water-based alternative to our most renowned shellac product. Formulated directly based on this research, B-I-N AQUA will be invaluable to decorators everywhere. The ground- breaking water-based formula delivers ultra-low odour, exceptional odour blocking, stain-killing technology and lightning-fast drying times. Our mission with B-I-N AQUA was to achieve the lowest practicable VOC level and we've succeeded. With less than 0.1% VOCs, B-I-N AQUA achieves the British Coatings Federation's Trace VOC Globe, highlighting the product as having the lowest practicable level of VOCs.- KINDER TO THE ENVIRONMENT: The innovative water-based formula contains only trace elements of VOCs (<0.1%).
- KINDER TO YOUR PAINTBRUSH: Easy soap and water clean-up that's less abrasive to brushes and rollers.
- A BREATH OF FRESH AIR: Ultra-low odour makes for more comfortable paint application.
- 4-in-1 PRIMER-SEALER: Effectively primes, seals, blocks stains and locks in problem odours.
- START FAST, FINISH FASTER: Lightning fast drying time of 25 minutes, recoatable in 45 minutes.
- EXCELLENCE INSIDE & OUT: Suitable for a wide range of interior/exterior applications.
- VARNISH: With an advanced, high-hiding formulation, B-I-N AQUA can be used as a full-surface primer on varnish, glossy paint, wood panels, building boards, PVC, plywood, concrete and more.
- STAINS & TANNIN BLEED: B-I-N AQUA's specialist, stain-killing formula efficiently blocks tannin bleed and water, grease, oil, mildew, crayon and lipstick stains.
- KNOTS & SAP STREAKS: B-I-N AQUA delivers effective knot blocking and seals resin and sap streaks.
- SMOKE & FIRE: Brilliant for priming damaged surfaces, B-I-N AQUA blocks smoke stains and seals odours from fire damage, nicotine, soot, fireplaces and heaters.
-
Tough and scrubbable, PermaWhite® is the best mould resistant paint for high moisture areas like bathrooms, kitchens, laundry rooms and finished basements. It is ideally suited for any area of persistent high humidity, frequent temperature changes and poor air circulation - the main causes of mould and mildew. The durable mould resistant paint film is designed to resist cracking, peeling and blistering for up to 7 years and bonds to existing solvent-based or glossy paints. PermaWhite® is also ideal for sealing flat paint, new drywall, cement block and concrete. Available in two finishes: Zinsser PermaWhite® Interior Matt - A scrubbable, matt finish recommended for application in high-humidity areas where a durable, low sheen finish is desired. Zinsser PermaWhite® Interior Satin - A scrubbable, satin finish recommended for high-humidity areas where a higher sheen level is required. *Satin & Matt: Once dried the paint film is classed as a treated article and contains the surface biocide 4,5-dichloro-2-n-octyl-4-isothiazolin-3-one 0.12% by weight. Key Features & Benefits- Contains a biocide to protect the dried coating against fungal degradation*
- Paint film is designed to resist cracking, peeling and blistering for up to 7 years before first maintenance
- Self-priming – sticks to surface without sanding
- Washable, stain and moisture resistant finish
- Scrubbable to Class 1 Wet Scrub Rating (ISO 11998)
- Fade resistant
- Water-based, low odour
